Imprimer
    KRUKOWIAK FRONT TANK New Autre en venteKRUKOWIAK FRONT TANK New Autre en vente
    KRUKOWIAK FRONT TANK New Autre en venteKRUKOWIAK FRONT TANK New Autre en vente
    KRUKOWIAK FRONT TANK New Autre en venteKRUKOWIAK FRONT TANK New Autre en vente
    Photos(3)

    KRUKOWIAK FRONT TANK

    Autre
    Appelez pour le prix 

    Information sur le vendeur

    Voir les informations du vendeur

    KFMR KRUKOWIAK

    Contact:Lukasz Szkopiak

    Téléphone:+48 48 888 01 87

    Brześć Kujawski, Pologne 87-880

    Général

    fabricant
    KRUKOWIAK
    Modèle
    FRONT TANK
    Etat
    Neuf
    Description
    Front tank CALL FOR PRICE Front tank with a capacity of 600–1500 l, increasing the capacity of the set with the HEROS sprayer up to 3500 l. The KFMR KRUKOWIAK series currently offers a front tank for field sprayers in four capacities: 600, 800, 1,100 and 1,500 liters, dedicated mainly to the Heros sprayer series with capacities up to 2,000 liters, which makes it possible to create a set with a capacity of up to 3,500 liters mounted directly on the tractor. The benefits of using front tanks are undeniable. They not only allow for increased capacity of a mounted sprayer, thus increasing application efficiency, but are also an excellent way to balance the weight distribution between the front and rear of the tractor. Applying with a mounted sprayer offers many advantages, including reduced plant impact on headlands and significantly more convenient maneuvering than with a trailed sprayer. However, during application, the rear of the tractor is constantly burdened by the weight of the sprayer and the working fluid in its tank. In practice, it is necessary to add weight to the front of the tractor; a front tank performs this role perfectly, simultaneously increasing the sprayer's capabilities. KRUKOWIAK front tanks are made of plastic, making them lightweight, damage-resistant, and easy to clean. Furthermore, a single unit also houses the clean water and handwash tanks. These tanks are mounted on a sturdy frame and adapted for mounting on the tractor's front three-point linkage. They are available in two main versions. The most common version is a hydraulic agitator powered by an electric pump (12V). The electric pump is used solely to drive the agitator. Connection to the sprayer is via two ports, allowing for bi-directional fluid flow. Preparation of the working fluid takes place in the main tank, which is then pumped to the front tank. After preparing the next batch of fluid in the main tank, the system is ready for use. If the liquid in the main tank is overflowing during the application, it is necessary to stop and pump the liquid from the front tank. Pumping is performed using the sprayer's liquid pump; the speed of pumping the liquid from one tank to the other depends on the pump's capacity.